Fitting And Removing The Mulch Plug; Fitting And Removing The Chute - Stihl RMA 510 V Manual De Instrucciones

Ocultar thumbs Ver también para RMA 510 V:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7 Assembling the Lawn Mower
► Open the discharge shield (1) and hold it in position.
► Hold grass box (2) by the handle (3) and engage the
hooks (4) on the rod (5).
► Rest the discharge shield (1) on the grass box (2).
7.2.2
Removing the Grass Box
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Open the discharge shield and hold it in position.
► Hold grass box by the handle and lift it away.
► Close the discharge shield.
7.3

Fitting and Removing the Mulch Plug

7.3.1
Fitting the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
1
► Open the discharge shield (1) and hold it in position.
► Hold the mulch plug (2) by the grip (3) and fit it in the
discharge duct (4).
► Close the discharge shield (1).
7.3.2
Removing the Mulch Plug
► Switch off the mower, remove the activation key and
battery.
0458-819-9921-A
2
3
4
► Place the mower on a flat surface.
► Open the discharge shield and hold it in position.
► Remove the mulch plug.
► Close the discharge shield.
7.4

Fitting and Removing the Chute

7.4.1
Fitting the Chute
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
► Open the side discharge shield (1) and hold it in position.
► Engage hooks (2) on the shaft (4) from below.
► Rest the side discharge shield (1) on the chute (3).
7.4.2
Removing the Chute
► Switch off the mower, remove the activation key and
battery.
► Place the mower on a flat surface.
4
1
3
2
English
15

Publicidad

Tabla de contenido
loading

Tabla de contenido