Assembling The Grass Catcher Box; Removing And Fitting The Battery - Stihl RMA 443 Manual De Instrucciones

English
► Place the lawn mower on a level surface.
► Hold handlebar (1) and open quick-clamping
devices (2).
► Fold down handlebar (1) forwards.
7.3 Assembling, Attaching and
Detaching the Grass Catcher
Box
7.3.1

Assembling the Grass Catcher Box

► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
inside.
► Press upper part of grass catcher box (1)
downwards.
The upper part of the grass catcher box
engages with a click.
7.3.2 Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
32

8 Removing and Fitting the Battery

► Open discharge flap (1) and hold it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and attach to mounts (5) using
hooks (4).
► Set down discharge flap (1) on grass catcher
box (2).
7.3.3 Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
8 Removing and Fitting the
Battery
8.1 Fitting the Battery
► Open flap (1) as far as the stop and hold.
► Push battery (2) into battery compartment (3)
as far as it will go.
Battery (2) engages with a click and is locked
in place.
0478-131-9960-C