Imetec INTELLIVAPOR ECO E9801 Instrucciones Para El Uso página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
EN
Fabrics with this symbol cannot be ironed (spandex, elatsan or prints)
Filling the removable water reservoir
The water reservoir can be removed and filled at any time during use.
Fill the water reservoir (1) before using the appliance and when the no water LED (11) lights
up
1.
Remove the water reservoir (1) from the steam generator (FIG. C)
2.
Fill the reservoir with water up to the maximum level (FIG. D)
3.
Reinsert the reservoir in the steam generator sliding it along the guides until it clicks
into position (FIG. E) and the no water LED (11) goes off.
ATTENTION! Do not overturn or shake the steam generator when the
reservoir is full.
Ironing
Place the boiler on a flat and firm surface.
Ensure that there is water in the reservoir (1) (see chapter: "Filling the removable water
reservoir").
Connect the plug (7) to a suitable socket.
Press the ON/OFF button (6).
Upon switch-on, all the LEDs on the dashboard will light up simultaneously for a few
seconds.
The steam (ready) LED (9) starts to flash during the warm-up phase.
Start ironing when the steam (ready) LED (9) lights up and stops blinking.
The plate temperature LED (14) goes on and off intermittently while ironing, indicating
that the appliance maintains the optimal temperature.
Press the steam button (16) to steam iron.
Dry iron by not pressing the steam button (16).
Continuous steam
The "continuous steam" function can be used to eliminate difficult creases.
Press the steam button (16) three quick consecutive times to activate the function. In
this mode, the system delivers steam continuously.
Press the steam button (16) again to deactivate the "Continuous steam" function.
ECO function
The appliance is equipped with a new technology that optimises steam production, thereby
reducing energy consumption.
Activate the Eco function by pressing the ECO button (8). The ECO LED lights up.
Deactivate the Eco function by pressing the ECO button (8) again.
The ECO function goes off automatically every time the appliance is switched off.
14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido