Before You Call For Service - GE PVB94 Manual Del Usuario

Save time
and money!
Review the
troubleshooting
tips on this
page first and
you may not
need to call
for service.
PROBLEM
FAN DOES
NOT WORK
VENT DOES
NOT WORK
POSSIBLE CAUSE
• The vent is not fully extended. Press the ON/OFF pad.
• The vent is not plugged into an outlet. Plug the vent into a 120V
power outlet.
• The raise/lower pad did not engage the lift motor. Hold down the
pad for a couple of seconds to activate the motor.
reset if necessary.
• Sufficient makeup (replacement) air is required for exhausting
appliances to operate to rating. Check with local building codes, which
may require or strongly advise the use of makeup air. Visit
GEAppliances.com for available makeup air solutions.

Before You Call For Service...

Downdraft Vent System
7