JUKI DLN-6390 Manual De Instrucciones página 61

��R SA�E �PERATI�N
1. To avoid personal injury, never put your fingers under the needle when you turn ON the power
switch or operate the sewing machine.
2. To avoid personal injury, never put your fingers into the thread take-up cover while the sewing
machine is in operation.
3. To avoid personal injury� turn ��� the power switch when you tilt the machine head.
4. To prevent possible personal injury caused by being caught in the machine, keep your fingers,
head and clothes away from the handwheel and the thread take�up while the sewing machine is
in operation. In addition� place nothing around it.
5. To avoid personal injury, never operate the sewing machine with the finger guard removed.
6. To avoid personal injury, be careful not to allow your fingers in the machine when tilting the
machine head.
7. To prevent accidents caused by electric shock� never open the motor control box cover or
touch the components inside the control box while the power switch is �N.
1. �or the safety� never operate the sewing machine with the ground wire for the power supply
removed.
2. �e sure to turn ��� the power switch in prior when connecting/disconnecting the power plug.
3. In time of thunder and lightning� stop your work and disconnect the power plug from the
receptacle so as to ensure safety.
4. When you move the sewing machine from a cold place directly to a warm place� dew
condensation may result. Turn ON the power to the machine after you have confirmed that
there is no fear of dew condensation.
5. To prevent fires, periodically draw out the power plug from the plug socket and clean the root
of the pins and the space between pins.
6. The hook rotates at a high speed while the machine is in operation.
To prevent possible injury to hands� be sure to keep your hands away from the vicinity of
the hook during operation. In addition� be sure to turn ��� the power to the machine when
replacing the bobbin.
7. Never operate the machine with any of the belt cover, finger guard or safety devices such as
eye guard cover� etc. removed.
8. �e careful of handling this product so as not to pour water or oil� shock by dropping� and the
like since this product is a precision instrument.
9. When tilting or returning the sewing machine to the home position� hold the upper side of the
machine head with both hands and perform the work quietly so that fingers or the like are not
caught in the machine.
10. In case of maintenance, inspection, or repair, be sure to turn OFF the power switch and confirm
that the sewing machine and the motor have completely stopped before starting the work. (In
case of the clutch motor� it continues rotating for a while by the inertia even after turning ���
the power switch. So� be careful.)
v