Black and Decker TO5000SD Manual De Uso Y Cuidado página 10

TRADITIONAL BAKE
Preheating will be required before cooking and convection technology will
not be in use .
1 . After selecting the BAKE function, deselect the NO PREHEAT and
CONVECTION buttons .
2 . Turning the TEMP knob, adjust temperature to desired temperature .
3 . Turning the TIME knob, adjust time to set cook time .
4 . Press the START/STOP button to begin preheating .
5 . The temperature display will blink while the oven is preheating .
6 . Once the oven has preheated, you will hear 2 audible beeps and the time set
will automatically begin counting down .
7 . Place food directly on wire rack or insert pan into rack guide .
8 . There will be 3 audible beeps once the baking cycle is complete and the oven
will stop heating .
9 . Unplug the appliance when not in use .
P IZZ A F U N C TI O NS
1 . Place wire rack in the middle rack position .
2 . Select the PIZZA function using the function knob . Pause for a moment . A
second menu with four pizza options will display to the right of PIZZA . Still
using the function knob, select the type of pizza being cooked once options
appear on the screen .
FRESH
1 . Select the PIZZA/FRESH function . NO PREHEAT and TURBO are not options
to cook FRESH pizza .
2 . Turning the TEMP knob, adjust temperature to desired temperature .
3 . Turning the TIME knob, adjust time to set cook time .
4 . Press the START/STOP button to begin preheating .
5 . The temperature display will blink while the oven is preheating .
Note: For best results place baking pan in oven while preheating, then place
pizza on preheated pan to bake.
6 . Once the oven has preheated, you will hear 2 audible beeps and the timer will
automatically begin counting down .
7 . Place pizza directly on pan and place in oven .
8 . There will be 3 audible beeps once the baking cycle is complete and the oven
will stop heating .
9 . Unplug the appliance when not in use .
10