B Roi L Fun Ct Io N; R Oast Fu Nc T Ion - Black and Decker TO5000SD Manual De Uso Y Cuidado

Hornos de convección para mostrador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FROZEN, RISING, AND CRISPY PIZZA
CRISPY PIZZA setting can be used for frozen pizza when a crispier crust
is desired .
1 .
Place pizza directly on wire rack .
2 .
After selecting the PIZZA function, NO PREHEAT and CONVECTION buttons
will illuminate automatically . NO PREHEAT cannot be turned off for FROZEN,
RISING, and CRISPY functions . If you would like to preheat the oven, please
refer to TRADITIONAL BAKE instructions (page 10) .
3 .
Turning the TEMP knob, adjust temperature to recommended temperature .
4 .
Turning the TIME knob, adjust time to set cook time . DO NOT ADD IN TIME
FOR PREHEATING THE OVEN—THE OVEN DOES NOT NEED TO PREHEAT
WHEN THE NO PREHEAT OPTION IS CHOSEN .
5 .
Press the Start/Stop button to begin baking .
6 .
There will be an audible beep once the baking cycle is complete and the oven
will stop heating .
7 .
Unplug the appliance when not in use .

B ROI L FUN CT IO N

1 .
Place wire rack or baking pan in the top rack position .
2 .
Slide the baking pan under the wire rack to catch drippings during broiling .
3 .
Select the BROIL function . The oven will default to 450˚F . NO PREHEAT, TURBO,
and CONVECTION are not available on the BROIL setting .
4 .
If needed, turn the TIME knob to set cook time .
5 .
Press the START/STOP button to begin broiling .
Note: For best results when broiling meat, turn over the meat half-way
through broiling.
6 .
There will be 3 audible beeps once the broiling cycle is complete . The oven will
stop heating .
7 .
Unplug the appliance when not in use .

R OAST FU NC T ION

1 .
Place wire rack in the bottom rack position .
2 .
Select the ROAST function using the function knob . NO PREHEAT, TURBO, and
CONVECTION are not available on the ROAST setting .
3 .
Turning the TEMP knob, adjust temperature to desired temperature .
4 .
Turning the TIME knob, adjust time to set cook time . You may choose STAY ON
so the oven does not stop cooking until you press STOP . To choose STAY ON,
turn the time knob past 2 hours until you see "ON" .
5 .
Press the START/STOP button to begin preheating .
6 .
The temperature display will blink while the oven is preheating .
7 .
Once the oven has preheated, you will hear 2 audible beeps and the time set
will automatically begin counting down .
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido