boso medicus vital Manual Del Usuario página 71

Error messages
Cause of Err message: Troubleshooting:
The pulse value could
not be determined
correctly.
Internal Error
Display:
Check position of cuff
and repeat measurement.
Remove the batteries and briefly press START but-
ton. Put the batteries back into the monitor. If the
error persists, return the instrument for repairs to
the manufacturer.
Troubleshooting:
Repeat measurement recommended, holding the
arm absolutely still.
If the symbol appears again, even with the
arm held still, this may be an indication of an irre-
gular heartbeat.
Please discuss this with your doctor at your next
visit.
EN
71