Noise/Vibration Information - Bosch ANGLE EXACT 2 Manual Original

OBJ_BUCH-412-003.book Page 21 Friday, November 4, 2016 1:50 PM
Industrial Cordless Angle Wrench
ANGLE EXACT
Article number 0 602 492 ...
Max. torque for hard/soft screwdriving
application according to ISO 5393
No-load speed n
0
Rated voltage
Rotational direction
Weight according to EPTA-Procedure
01:2014
Degree of protection
Ni-Cd battery pack
Article number 2 607 335 ...
Number of cells
Battery voltage
Capacity
Weight according to EPTA-Procedure 01:2014
Ni-MH battery pack
Article number 2 607 335 ...
Number of cells
Battery voltage
Capacity
Weight according to EPTA-Procedure 01:2014
Angled drive head
Article number 0 607 ...
Maximum torque, hard screw-
driving application according to
ISO 5393
Weight according to EPTA-
Procedure 01:2014
Straight drive head
Article number
Maximum torque, hard screwdriving application according to
ISO 5393
Weight according to EPTA-Procedure 01:2014

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745, EN 50518:
Screwdriving without impact: a <2.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
Bosch Power Tools
25–200 25–250 30–300 30–380 40–280 50–210 60–170
... 615 ... 605 ... 621
Nm 25/25 25/20 30/30
-1
min 200 245 300
V 9.6 9.6 14.4
kg 1.2 1.6
IP 20 IP 20 IP 20
9.6
... 877 ... 659
8
V 9.6
Ah 1.8
kg 0.45
9.6
... 681 ... 683
8
V 9.6
Ah 2.6
kg 0.55
1/4" 3/8"
... 453 617 ... 453 620
Nm 20 25
kg 0.23 0.23
Nm
kg
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
2 2
, K=1.5 m/s .
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 21
... 603 ... 601 ... 613
30/25 40/35 50/45
380 280 210
14.4 14.4 14.4
1.3 1.6 1.6 1.6
IP 20 IP 20 IP 20
9.6 12.0 12.0 14.4
... 879 ... 375 ... 881
8 10 10 12
9.6 12.0 12.0 14.4
2.4 1.8 2.4 1.8
0.50 0.65 0.70 0.70
12.0 14.4
... 685
10 12
12.0 14.4
2.6 2.6
0.70 0.80
3/8"
1/4" QC 1/4"
... 451 618 ... 453 618 ... 453 630
30 20
0.27 0.23
QC 1/4"
0 607 453 631
1 609 92A 37D | (4.11.16)
... 617
60/60
170
14.4
1.6
IP 20
14.4
... 655
12
14.4
2.4
0.80
20
0.23
6
0.22