Agri-Fab 45-05122-131 Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 12:
(SEE FIGURE 12)
Assemble the flow control mounting tube to the hitch
tube using two 5/16" x 1-3/4" hex bolts (E) and 5/16"
nylock hex nuts (G). DO NOT TIGHTEN YET. See
figure 12.
5/16 x 1-3/4
HEX BOLT
STEP 13:
(SEE FIGURE 13)
Assemble the two INNER hitch braces to the flow
control mounting tube using a 1/4" x 1-3/4" hex bolt
(D) and a 1/4" nylock hex nut (F). DO NOT TIGHTEN
YET. See figure 13.
TIGHTEN all nuts and bolts assembled up to this
point. Do not collapse the tubes when tightening.
1/4 x 1-3/4
HEX BOLT
12
5/16 NYLOCK NUT
13
1/4 NYLOCK NUT
STEP 14:
(SEE FIGURE 14)
Assemble one side of the hopper strap to the hopper
using a 1/4" x 1" hex bolt (K), a small washer (M), a
nylon washer (L), and a 1/4" nylock nut (F). Repeat
for the other side. See figure 14.
8
1/4-20 x 1 HEX BOLT
SMALL WASHER
NYLON WASHER
1/4 NYLOCK NUT
14

Publicidad

Tabla de contenido
loading

Tabla de contenido