Spout Installation - Kohler K-7303 Guia De Instalacion

Spout
Nut

1. Spout Installation

Apply a bead of plumbers putty or other sealant to the underside
of the spout or putty ring (if supplied) according to the putty
manufacturer's instructions.
Locate the center hole and insert the spout.
Slide the metal washer and nut onto the spout shank.
Position the metal washer so the second hole is at the back of the
spout.
Securely tighten the nut with a wrench. Do not overtighten.
Remove any excess putty or sealant.
Kohler Co.
Apply
Plumbers
Putty
Metal
Washer
3 117121-2-AB