Spout Installation - Kohler K-8220 Guia De Instalacion

Spout
Escutcheon
Gasket
Sink
Shank
Washer
Nut

1. Spout Installation

Remove the spout and escutcheon from the shank.
Thread the nut and washer to the bottom of the shank.
Insert the shank from the bottom of the sink hole.
Slide the gasket to the shank.
Thread the escutcheon to the shank.
Tighten the nut and washer to secure the shank to the sink.
Thread the spout to the shank.
2. Handspray Installation
NOTE: If the handspray is not desired, cap the lower shank tee
outlet.
Apply a bead of plumbers putty or other sealant to the underside
of the spray holder according to the manufacturer's instructions.
Insert the spray holder through the sink hole.
Securely hand tighten the nut from under the sink.
Remove any excess putty or sealant.
Insert the handspray hose through the spray holder.
Thread the hose to the shank tee using thread sealant.
Kohler Co.
Handspray
Apply
plumbers
putty.
Shank
Tee
Handspray
Hose
3
Spray
Holder
Nut
113031-2-AC