DeWalt DW756 Manual De Instrucciones página 9

Fig. J
DW756
23
24
25
Fig. K
26
24
22
8. Install the new wheel or other accessory
For the DW756 (Fig. J), be sure that the wheel flanges
24 are in place (concave side toward the wheel).
For the DW758 (Fig. K), be sure the spacers
the wheel flanges are both in place (concave side
24
toward the wheel).
9. Hold both hex nuts 22 as before and tighten them
but do not overtighten. Overtightening can crack a
grinding wheel.
10. Replace the wheel covers and their screws.
11. Adjust the spark guard
1
wheel and tighten securely.
12. Adjust the tool rest 4 to 1/8" (3.18 mm) from the wheel
and tighten securely.
13. Adjust the eye shield 2 to a point between your eyes
and the wheel. The bench grinder is now ready for use.
14. Follow the above steps to install buffing wheels and
wire wheel brushes as well as grinding wheels.
26
24
22
24
DW758
23
27
25
19
25 .
and
27
to 1/16" (1.6 mm) from the
DW756
gRinDing WhEEls
5/8" (16 mm) Face, 6" (152 mm)
dia. 60 grit medium grinding wheel
3/4" (19 mm) Face, 6" (152 mm)
dia. 60 grit medium grinding wheel
5/8" (16 mm) Face, 6" (152 mm)
dia. 36 grit coarse grinding wheel
1/2" (13 mm) Face, 6" (152 mm)
dia. 60 grit medium grinding wheel
BUFFing WhEEls
5/8" (16 mm) Face, 6" (152 mm)
dia. cotton buffing wheel
WiRE WhEEl BRUshEs
1/2" (13 mm) arbor, 5/8" (16 mm)
Face, 6" (152 mm) dia.
DW758
gRinDing WhEEls
7/8" (22 mm) & 1" (25 mm) Face,
8" (200 mm) dia. 60 grit medium
grinding wheel
7/8" (22 mm) & 1" (25 mm) Face,
8" (200 mm) dia. 36 grit coarse
grinding wheel
BUFFing WhEEl
5/8" (16 mm) arbor, 8" dia. cotton
buffing wheel
WiRE WhEEl BRUshEs
5/8" (16 mm) arbor, 5/8"
(16 mm)–1–1/4" (32 mm) Face,
8" (200 mm) dia.
Repairs

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a D
service center or a D WALT authorized service center.
e
Always use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
COnFiRMATiOn OF OWnERshiP: In case of
•
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.dewalt.com/register.
English
MAX. sAFE sPEED
4136 RPM
4136 RPM
4136 RPM
3825 RPM
3600 RPM
3600 RPM
MAX. sAFE sPEED
3600 RPM
3600 RPM
3600 RPM
3600 RPM
WALT factory
e
7