Selecting A Station; Automatic Tuning; Manual Tuning; Selecting The Seek Tuning Sensitivity - Blaupunkt Boston RCC 45 Instrucciones De Montaje

Ocultar thumbs Ver también para Boston RCC 45:
Tabla de contenido

Publicidad

Selecting a station

With this car radio you can receive FM sta-
tions between 87.5 and 108 MHz.

Automatic tuning

/
Press
/ ; the car radio will automati-
cally search for the next station.
When keeping the
or the
sed, seek tuning will speed up in upwards or
downwards direction.
Up
Down
Down in short intervals
Up in short intervals
Manual tuning << >>
Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.
When holding the right or left part of the
rocker switch pressed down, the frequency
scan is speeded up.
20
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
sensitivity.
If "lo" is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If "lo" does not light up, the radio will also pick
up weaker, distant stations (high sensitivity).
button depres-
To switch over,
Press lo or dx.

Switching from stereo to mono

If reception is poor, you may get better sound
quality by switching to mono:
Press the lo button for approximately
2 seconds until you hear a beep.
Each time the radio is switched on, stereo
playback is activated.
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.

Changing the memory bank

You can shift between the memory banks I, II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
Press the FM button as many times
until the desired memory bank lights up
in the display.

Storing stations

You can store six FM stations on the preset
buttons 1 to 6 for each of the memory banks
I, II and T.
Select the memory bank.
Tune in a station with the rocker switch
(either automatically or manually).
Press the desired preset button until
you hear a beep.
Now the station has been stored.
The activated preset button is indicated in the
display.
Notice:
Should you tune in a station which has alrea-
dy been stored before, the corresponding
preset button and the memory bank will briefly
flash in the display if you have selected
another memory bank.

Publicidad

Tabla de contenido
loading

Tabla de contenido