geberit SIGMA10 Manual Del Usuario página 14

EN
1
Remove the actuator plate.
To ensure that the conversion is
successful, the following steps must
be performed within 15 minutes:
2
Disconnect the power supply cable
from the control for 10 seconds.
14
3
Reconnect the mains cable to the
control.
✓ Indicator light lights up.
✓ After 15 seconds, 5 triple tones
sound to indicate that
deactivation is complete.
4
Mount the actuator plate.
4443609099-1 © 08-2018
966.230.00.0 (02)