geberit SIGMA10 Manual Del Usuario página 13

Operation
Using Geberit Sigma10
To release a flush, place your hand in the detection range (approx. 15 cm) in front of the
actuator plate. You do not need to touch the actuator plate. Place your hand in the detection
range for approx. 0.5–1 second for a large flush and for approx. 1–2 seconds for a small flush.
4443609099-1 © 08-2018
966.230.00.0 (02)
Deactivating automatic flush
actuation
The preset automatic flush actuation can be
deactivated at any time.
The procedure for activating
automatic flush actuation is the same
as for deactivating it. 5 single tones
will sound to indicate that automatic
flush actuation has been activated
successfully.
Prerequisite
– The WC flush control is ready for
operation.
Loosen any screws that may be
present on both sides of the actuator
plate.
EN
13