Maintenance Regulations - geberit ESG 3 Manual De Operación

EN
Maintenance

Maintenance regulations

For safety reasons, it is absolutely essential to observe the
following maintenance intervals and perform the
maintenance work described.
Interval
Regularly
(before use, at
the start of the
working day)
44
Maintenance work
• Visually inspect the electrofusion machine for
externally visible defects and damage that
could affect safety. Do not operate a damaged
electrofusion machine
• Visually inspect the mains cable for externally
visible defects and damage that could affect
safety. Have the mains cable replaced by an
electrically skilled person if necessary
• Clean the electrofusion machine with a damp
cloth
B1158-002 © 07-2016
966.473.00.0 (02)