Start Up Instructions; Mounting The Machine; List Of Materials - Garland XTRIM 700 PE Manual De Instrucciones

6. START UP INSTRUCTIONS

6.1. LIST OF MATERIALS

This machine includes the following elements that you
will find inside the box:
2
5
1. Engine.
2. Bottom transmission with head.
3. Protector.
4. Harness.
5. Manillar.
- Instruction manual.
Ensure that all elements listed above are included
with the machine. Thanks to the quality control checks
at the factory it is highly unlikely that any elements
will be missing. If you were to find any element
missing, do not use the machine until the defect has
been repaired or the machine is complete.
Using the machine with defective parts or without all
the elements can cause severe personal damages.
3
4
1
31/120

6.2. MOUNTING THE MACHINE

6.2.1.HANDLEBAR
6.2.2. PROTECTOR ASSEMBLY
Place the guard as shown in the figure.
Insert the screw, screw the nut and tighten.
6.2.3. TRANSMISSION
English