Technical Data; Machinery Directive; Definitions: Safety Guidelines; English (Original Instructions) - DeWalt D25820 Traducido De Las Instrucciones Originales

SDS MAX CHIPPING HAMMERS
D25820
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
e
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power input
Frequency
Single impact energy (EPTA 05/2009)
No load beats per‑minute
Chisel positions
Tool holder
Weight
Noise values and/or vibration values (triax vector sum) according to EN60745‑2‑6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a =
h,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN60745
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
WALT one of the most reliable
e
D25820
V 230
AC
V 230/115
AC
2
W 1150
Hz 50
J 8
bpm 2740
18
SDS Max
kg 5.8
dB(A) 94
dB(A) 105
dB(A) 3
m/s 2 13.2
m/s 2 1.6
EC-Declaration of Conformity

Machinery Directive

SDS Max Chipping Hammers
D WALT declares that these products described under Technical
e
Data are in compliance with: 2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-6:2010.
2000/14/EC Electrical concrete breaker (hand held) m </= 15kg, Annex VIII;
TÜV Rheinland LGA Products GmbH (0197), D-90431 Nürnberg, Germany
Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC (Article 12, Annex III, No. 10;
m </= 15 kg)
L (measured sound power level)
WA
L (guaranteed sound power level)
WA
These products also comply with Directive 2014/30/EU and 2011/65/EU. For
more information, please contact D
to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering PTE Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
08.03.2017
WARNING: To reduce the risk of injury, read the instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
EngLIsh
dB 102
dB 105
WALT at the following address or refer
e
WALT.
e
11