Removing And Installing Lower Plate - Panasonic MC-UG583 Instrucciones De Operación

For service questions, contact Panasonic at 1-800-211-7262.
For sales inquiries, contact Sylvane at 1-800-934-9194.
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Latches
Loquets
Lengüetas
Lower Plate
Plaque inférieure
Base inferior
Electrical Shock or Personal Injury Hazard

Removing and Installing Lower Plate

Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
Place paper under nozzle anytime
lower plate is removed to protect
floor.
Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
Release lower plate by pressing two
(2) latches inward.
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
Make sure all wires are routed
properly and not pinched.
Press lower plate into place then
push two (2) latches outward.
- 28 -