Features; Using Cord Hook; Tool Storage - Panasonic MC-UG583 Instrucciones De Operación

For service questions, contact Panasonic at 1-800-211-7262.
For sales inquiries, contact Sylvane at 1-800-934-9194.
Crevice Tool
Raised Tab
Wand
Tube
Tubo

Using Cord Hook

Cord Hook
Crochet de rangement
du cordon
Sujetador del cordón
Wands (2)
Tubes (2)
Tubos (2)
Suceur plat
Herramienta para hendiduras
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Saillie
Lengüeta saliente
Hose
"J" Slot
Ranura en "J" Manguera
Fente "J" Tuyau
FEATURE
1)
Detach plug head from power cord.
Rotate cord hook down to release
cord.
2)
Return the cord hook to the upright
position before attempting to rewind
the cord.

Tool Storage

Some tools may already be stored on
vacuum cleaner.
Place hose in front of handle on hose
holder.
Attach wand to hose by aligning the two
(2) raised tabs on wand with "J" slots in
hose, guide tabs along grooves, twist to
lock in place.
Place wand in center slot of tool holder,
twisting and pushing down over short
hose to assure a good connection.
Store other wand in front slot of tool
holder with dusting brush in top of wand.
Place crevice tool into rectangular rear
slot of tool holder.
Refer to PARTS IDENTIFICATION section
for tool location.
- 14 -