Symbols - Homelite UT43103 Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read The Operator's
Manual
Wear Eye and Head
Protection
Wet Conditions Alert
SAFE-T-TIP Nose Guard
Operate With Two Hands
One Handed
Kickback
Bar Nose Contact

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1, along with head protection.
Do not expose to rain or use in damp locations.
The SAFE-T-TIP nose guard on the guide bar helps prevent
kickback.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
DANGER! Beware of kickback.
Avoid bar nose contact.
Page 7 — English
DESIGNATION/EXPLANATION