Moser 1591Q Traducción Del Manual De Uso Original página 14

ENGLISH
Maintenance
de
Warning! Injuries and material damage due to
incorrect handling.
en
f Switch off the appliance before cleaning it or per-
forming any maintenance and disconnect it from
fr
the mains.
it
Cleaning and care
Danger! Electric shock due to penetration of
es
liquid.
f Do not immerse the appliance in water!
pt
f Do not allow any liquid to get inside the appliance.
f Only reconnect the appliance to the power supply
nl
if it is completely dry.
da
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the appliance
and accessories.
sv
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
no
mended by the manufacturer.
fi
Accessories and spare parts are available from your
dealer or our service centre.
tr
f Remove the attachment comb (Fig. 4ⓑ) after every use
pl
and lift the blade set out of the housing (Fig. 6ⓐ). Use the
cleaning brush to remove any cut hairs from the housing
cs opening and from the blade set (Fig. 7). The cleaning lever
can also be pressed. This allows the cut hairs that accumu-
late between the bottom blade and the top blade to be eas-
sk
ily removed using the cleaning brush (EASY CLEANING).
f The charging contacts on the appliance and on the charging
hr
stand should always be kept clean.
f Only wipe the appliance with a soft, slightly damp cloth.
hu
f The blade set using the hygienic spray.
f Oil the blade set with the blade set oil (Fig. 8).
sl
f For a good and long-lasting cutting performance, it
ro
is important to oil the blade set frequently.
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
bg
set should be replaced.
ru
Changing the blade set
Warning! Injuries and material damage due to
uk
incorrect handling.
f Switch off the appliance before changing the
et
blade set.
lv
1. Switch off the appliance using the on/off switch (Fig. 3ⓑ).
2. Slide the blade set off the housing in the direction of the
lt
arrow (Fig. 6ⓐ). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
el
pressing it down until it clicks into position (Fig. 6ⓑ).
ar
14
Problem elimination
Blade set is cutting badly.
Blade set is pulling hair out.
Battery operating time is too short.
Cause: Blade set is dirty.
f Clean and oil the blade set (Fig. 7/8).
Cause: Blade set is worn out.
f Replace the blade set (Fig. 6).
Skin injury
Cause: Too much pressure on the skin.
f Less pressure on the skin.
Cause: Cutting angle is too steep.
f Hold appliance flatter to the skin.
Charging indicator light does not light up.
Cause: The appliance must be switched off for charging.
f Check whether the appliance is switched off. (Fig. 3ⓑ).
Cause: Charging contacts are dirty.
f Clean the charging contacts on the appliance and on the
charging stand.
Cause: Defective power supply.
f Ensure that the plug-in transformer is plugged into the
mains socket.
f Check the mains cable for possible damage.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.