Installing The Base Cover; Hard Drive; Removing The Hard Drive Assembly - Dell Vostro 15–3568 Manual Del Usuario

Installing the base cover

1. Align the base cover with the screw holders on the computer.
2. Press the edges of the cover until it clicks into place.
3. Tighten the ( 8 screws - M2.5L8; 3 screws - M2L2; 2 screws- M2L2) screws to secure the base cover to the computer.
4. Flip the computer over.
5. Open the display and connect the optical drive connector to the system board.
6. Tighten the five M2L5 screws to secure the base cover to the palm rest.
7. Install the:
a. keyboard
b. optical drive
c. battery
8. Follow the procedure in

Hard drive

Removing the hard drive assembly

1. Follow the procedure in
2. Remove the:
a. battery
b. optical drive
c. keyboard
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 21