Installing the system fan
1. Align the system fan on the chassis.
2. Secure the system fan to the computer by tightening the two M2L5 screws.
3. Connect the system fan connector cable to the system board connector.
4. Install the:
a.
base cover
b.
keyboard
c.
optical drive
d.
battery
5. Follow the procedures in
Altavoz
Removing the speakers
1. Follow the procedure in
2. Remove the:
a.
battery
b.
optical drive
c.
keyboard
d.
base cover
3. To remove the speakers:
a. Disconnect the speaker cable from the computer [1].
b. Remove the speakers from the computer [2].
30
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.