Installing The System Board - Dell Vostro 15–3568 Manual Del Usuario

Installing the system board

1. Connect the power cable cable.
2. Affix the adhesive tape.
3. Flip the system board.
4. Align the system board with the screw holders on the computer.
5. Tighten the two M2L3 screws to secure the system board to the computer.
6. Tighten the display hinge screw to the computer.
7. Connect the following cables to the system board.
a. hard drive connector
b. touchpad connector
c. speaker connector
d. I/O connector
e. eDP connector
f. power connector
8. Install the:
a. system fan
b. heat sink
c. memory module
d. WLAN Card
e. base cover
f. keyboard
g. optical drive
h. battery
9. Follow the procedure in After working inside your computer.
Disassembly and reassembly 35