Klarstein FIGO Manual Del Usuario página 12

EN
12
7
Attach the rotor blades
with the spring washers
and screws that are
already on the motor.
10
Attach the bulbs (max.
42 W E14, not included)
to the lamp holder.
8
Connect the lamp
cables by plugging the
two plastic connectors
together until they snap
into place.
11
Attach the lampshade to
the socket by turning it
clockwise.
9
Attach the lamp socket
to the mounting
brackets and fix it with
three fixing screws and
star washers. Make
sure that you do not
disconnect any cables in
the process.