Grillo GF1 Uso Y Mantenimiento página 14

The throwing pipe adjustment rod must be fixed under the handlebar adjusting lever.
The snow thrower is 50 cms wide and can clear off snow up to 30 cms high. In case snow is very wet it
is convenient to keep the throwing pipe forward to avoid obstructions at the outlet. The two side skids must
be adjusted so that they just skim the ground if this is level (asphalted roads), or to keep the snow thrower
high if the ground is uneven.
MAINTENANCE
When work is finished it is convenient to remove the snow from the snow thrower in order to prevent its
blocking the turbine by freezing: use the special stick.
Check oil level inside the central box where the bevel torque is placed and add SAE 85W/90 lubricant (high
pressure), if necessary.
ATTENTION: Do not clean the implement if the engine is not stopped yet.
TRAILER
The trailer is mounted on the tool flanging. It is equipped with a dumper and reversible wheels to make
steering easier (Fig. 19).
TILTING BLADE cm. 80
This highly resistant device is ideal for removing snow and levelling mounds of soil or gravel. May be tilted
to the right and left (Fig. 20).
12