Nice Oview-TT Instrucciones Y Advertencias Para El Uso página 5

– Network options: function accessible for skilled users of Oview-TT in a
"BusT4" network (read paragraph C in the second part of the manual).
4.2 - "MENUS" section
This section is made up of 3 function groups. To access these, press the key
(l) Menu twice to display the relative items.
• "Screen Functions": this item includes sub-menus with the functions and
parameters related to motor operation.
• "Common Functions": this item includes sub-menus with aspects related
to motor identification.
• "Advanced Functions": this item contains a number of sub-menus acces-
sible only by skilled users of Oview-TT, in a "BusT4" network (read paragraph
C in the second part of the manual).
To access the sub-menus of each item, scroll through the list using the keys p
and q, select the item required and confirm by pressing key n. Graph B
shows a summary of the items available in the section Menus.
4.2.1 - Description of items in the menu "Screen Functions"
• Automation type – Enables selection of the application corresponding to
the automation connected to the motor to be programmed. Warning – This
selection will influence subsequent programming of the limit positions.
• Position programming – Enables programming of the limit positions and
partial (intermediate) positions available on the motor.
• Advanced Parameters – Comprises the following functions (to display and
modify individual items, select and access the screen displayed):
– Direction of movement: enables entry of the direction of motor direction
(clockwise/anticlockwise).
– Work time programming: enables programming of the activation time of the
relay controlling the manoeuvre (only on products with this function avail-
able).
– Pause time programming: enables programming of the time that the con-
trol unit remains on standby until the end of an opening manoeuvre before
activating automatic closure.
– RDC activation/deactivation: (torque reduction) enables activation (on) /
deactivation (off) of the function for the motor to reduce maximum torque in
the final phase of a closing manoeuvre, so that the fabric does not remain
excessively tensioned when completely rewound.
– RDC level: enables entry of the maximum RDC value (from 1 to 4). Level 1
corresponds to the minimum value of RDC. With this setting the motor
supplies the maximum torque in the closing phase, when the RDC function
+
l MENU
|
+
l Screen functions
|
|
+
l Screen functions
|
| |__Automation type
| |__Position programming
| |__Advanced parameters
| |__Weather sensors
| |__Radio codes
| |__Code lock/unlock (*)
| |__Data deletion
|
+
l Common functions
|
| |__Name
| |__Group
| |__Firmware version
| |__Hardware version
|
+
l Advanced functions
|
(*) – On NEO motors only.
is enabled. Level 4 corresponds to the maximum value of RDC. With this
setting the motor supplies the maximum torque in the closing phase, when
the RDC function is enabled.
• Weather sensors – Comprises the following functions (to display and
modify individual items, select and access the screen displayed):
– Sun sensor activation: enables activation (on) / deactivation (off) of the Nice
"sun" sensor functions. This function is only enabled when the sensor is
connected to the motor.
– Wind alarm level: enables entry of the "wind" protection activation level.
This function is only enabled when the Nice "wind" sensor is connected to
the motor.
– Sun alarm level: enables entry of the "sun" protection activation level. This
function is only enabled when the Nice "sun" sensor is connected to the
motor.
– Direction in case of rain: enables programming of the position that the
awning should reach in the event of rain. This function is only enabled when
the Nice "rain" sensor is connected to the motor.
• Radio codes – Enables programming or deletion of one or more transmitters.
Graph B
English – 4