Technical Specifications - Nice Oview-TT Instrucciones Y Advertencias Para El Uso

times until the "group" number of the required motor is displayed (top right of
screen) and confirm the selection by pressing n. Lastly, press the key (l)
Menu twice and proceed with programming as described in the first part of
this manual.
C - Using Oview-TT on a "BusT4" network
Oview-TT can also be used as a programmer and fixed wall-mounted control,
in a network made up of Nice devices equipped with "BusT4" communication
technology. To connect Oview-TT to this network, use a flat telephone cable
with 4 internal wires and two end connectors, type RJ45 6/4 (body 6 with 4
contacts). Lastly insert a cable connector in the "BusT4" socket on Oview-TT
(14 in fig. 1) and the other connector in a network device.
Important – For a complete description of the aspects regarding use of
Oview-TT in this type of network, refer to the Nice manual "Oview - Dis-
play programmer" downloadable from the website
www.niceforyou.com.
Disposal
This product is made of various materials; some may be recycled and others
must be disposed of. Seek information on the recycling and disposal proce-
dures envisaged by local regulations in the area for this product category.
Caution! – Some parts of the product may contain pollutant or hazardous sub-
stances which, if disposed of into the environment, may cause serious damage
to the environment or physical health. This product contains a battery; this
must be removed and must not be disposed of in public waste as it contains
pollutant substances. Therefore dispose of or recycle according to separate
waste collection procedures as envisaged by local current standards.
As indicated by the symbol alongside, disposal of this product in
domestic waste is strictly prohibited. Separate the waste into cate-
gories for disposal, according to the methods envisaged by current
legislation in your area, or return the product to the retailer when pur-
chasing a new version.
Caution! – Local legislation may envisage serious fines in the event of abusive
disposal of this product.

Technical specifications

n Type: programming unit for devices equipped with TTBus and BusT4 con-
nections. n Graphic interface: LCD display 128 x 64 dots (46 x 29 mm); 2.2".
n Operator input device: joypad with 5 + 2 keys. n Display / key lighting:
white light (chromatic coordinates: X = 0.29 – 0.33; Y = 0.30 – 0.34). n
Clock/calendar: internal, with backup battery (minimum lifetime 10 years). n
Connection cable length: 1 m (cable supplied). n Power supply: 2 built-in
batteries. n Battery charging: socket for power supply unit (min. 12V, 300mA).
n Current absorption: maximum 200 mA n Insulation: Class III n Housing
protection rating: IP 20 (for use only in protected or indoor areas) n Operat-
ing temperature: from –20°C to +55°C. n Battery charging temperature:
from +5°C to +35°C (indoors). n Dimensions (mm): 107 x 62 x h 25. n
Weight (g): 150 (without cable).
English – 6