Fein GRIT GXC Instrucciones De Uso página 11

en
10
Original Instructions for Cylindrical Grinding Device.
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the
machine shall aide in directing your attention to possible
hazardous situations when working with this machine.
Symbol Term, meaning
Action
Touching prohibited
General mandatory sign
Read documentation
Use eye-protection
Wear ear protection
Use dust mask
Use protective gloves
Danger warning
European conformity symbol
For your safety.
Do not use this machine before you have thor-
oughly read and completely understood these
operating instructions, including the figures, speci-
fications, and safety regulations.
Please also observe the relevant national industrial safety
regulations (e. g. in Germany: BGV A2, BGR 500).
Non-observance of the safety instructions can lead to an
electric shock, fire and/or severe injuries.
These operating instructions should be kept for later use
and enclosed with the power tool, should it be passed on
or sold.
Read and observe the operating instructions of the
GX75 belt grinder, which is to be mounted to this
machine.
For assembly of the cylindrical grinding device to the belt
grinder, use only the fastening material provided. Faulty
assembly can cause the cylindrical grinding device to
loosen from the belt grinder during operation and lead to
serious accidents.
Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of
stopping small abrasive or workpiece fragments.
The eye protection must be capable of stopping
flying debris generated by various operations. The
dust mask or respirator must be capable of filtrat-
ing particles generated by your operation. Pro-
longed exposure to high intensity noise may cause
hearing loss.
Before switching on, make sure that no work piece is
inserted in the cylindrical grinding device. The work piece
can be thrown from the machine and cause serious acci-
dents.
Never touch the running grinding belt. Danger of
injury.
Press the safety-off switch immediately in danger situa-
tions. The machine runs on for up to 50 seconds.
Clean the ventilation slots of the machine regularly. The
motor fan draws dust into the housing. Excessive accumu-
lation of metal dust can cause electrical dangers.
The mains plug of the machine may be mounted only by a
qualified electrician. The protective conductor in the
mains socket outlet must be connected with the protec-
tive earthing of the mains supply.
Pull out the mains plug for maintenance and repair! Switch-
ing the machine on unintentionally can lead to serious
injuries.
Have the electrical safety of the machine checked regularly
in accordance with statutory regulations. For machines
that have not been checked, there may be danger of elec-
trical shock!
Check the rotation direction of the motor before starting the
operation of the machine for the first time. If the rotation
direction of the motor is incorrect, the workpiece can be
thrown from the machine and cause an accident. The
rotation direction may be changed only by a qualified
electrician.
Always work with great attention and care, especially when
guiding in and removing the working material. Diminishing
attention can lead to serious injuries of your hands.
Be careful when working short or thin material. When
guiding in and removing, the grinding belt or the brake
wheel can catch hold of your hands and cause serious
injuries.
Be careful after switching off. The machine will run on for
approx. 1 minute. Carry out adjustments and mainte-
nance only when the grinding belt has come to a com-
plete stop.
At a glance.
1 Belt tension lever (GX75)
2 Cover/stop (GX75)
3 Spark guard (GX75)
4 Star-knob bolt for dust box (GX75)
5 Grinding rest (GX75)
6 Dust collector (GX75)
7 Lever for swivel device (GX75)
8 Side cover (GX75)
9 Wing nut
10 Star-knob bolts, Adjustment GXC
11 Drive motor for brake wheel
12 Clamping Star-knob for brake-wheel parallelism
13 Handle
14 Basin
15 Rollers
16 Lever for applying the brake wheel to the work piece
17 Brake wheel
18 Clamping lever
19 Star-knob bolt for brake wheel inclination