IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
COOKTOP SAFETY INSTRUCTIONS
cooktop ON above a Lo setting. Boilovers cause
smoking and greasy spillovers that may catch on fire.
oil or grease. Surface cooking is an "attended"
activity.
to heat beyond its smoking point, oil may ignite
resulting in fire that may spread to surrounding
possible to monitor oil temperature.
amount of oil when shallow pan-frying and avoid
cooking frozen foods with excessive amounts of ice.
flat bottoms large enough to cover the surface
heating element. The use of undersized cookware
will expose a portion of the surface unit to direct
contact and may result in ignition of clothing. Proper
relationship of cookware to surface unit will also
improve efficiency.
WARNING
COIL COOKTOP SAFETY INSTRUCTIONS
cause them to fail presenting a burn or fire hazard.
develops a glowing spot during use or shows
other signs of damage. A glowing spot indicates
the surface unit may fail and present a potential
burn, fire, or shock hazard. Turn the surface unit
off immediately and have it replaced by a qualified
service technician.
always be certain that the controls for all surface
units are at the OFF position and all coils are cool
before attempting to lift or remove a coil surface unit.
READ AND SAVE THESE INSTRUCTIONS
49-88075
earthenware or other glazed containers are suitable
for cooktop service; others may break because of
the sudden change in temperature.
flammable materials and spillage, the handle of a
container should be turned toward the center of the
range without extending over nearby surface units.
the fan on.
surface unit is ON, the surface unit will turn back on
as soon as power is restored. In the event of power
loss, failure to turn all surface unit knobs to the OFF
position may result in ignition of items on or near
the cooktop, leading to serious injury or death.
trap heat or melt, resulting in damage to the product
and a shock or fire hazard.
place. Their absence during cooking could damage
range parts and wiring.
5