Xerox CopyCentre C118 Guía De Referencia Rápida página 7

Ocultar thumbs Ver también para CopyCentre C118:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Verifying Network Setup Using
CentreWare Internet Services (IS)
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked
printers from your desktop using an embedded web server. CentreWare IS gives administrators easy access to
printer status, configuration, and diagnostic functions. It also provides users with access to printer status and
special printing functions such as printing saved jobs. With CentreWare IS software, you can access and
manage your printers over a TCP/IP network using a web browser.
Note
To enter network configuration settings via CentreWare IS, your computer must be on the same subnet as
the Xerox WorkCentre M118/M118i. For additional information about using CentreWare IS, see the
User Guide and the System Administrator Guide on the Customer Documentation CD-ROM or the
Xerox website.
To verify your network setup using CentreWare IS:
1.
At your computer, launch your web browser.
2.
Enter the machine's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click the Properties tab.
4.
Select the Protocol Settings folder on the left sidebar, and then select TCP/IP.
5.
If you are using a server name for the machine (instead of an IP address), enter the DNS server address in
the DNS Address 1 field, and then click the Apply New Settings button at the bottom of the page.
6.
Enter the default user ID and password in the Connect to [ip address] dialog box, and then click the
OK button.
Default user ID: admin
Default password: x-admin.
The user ID and password should be changed after network setup is complete.
Verifying Network Setup Using CentreWare Internet Services (IS)
Xerox WorkCentre M118/M118i
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Workcentre m118Workcentre m118i

Tabla de contenido