Improper Use; Safety Signs; Identification Label; Main Components - Stiga MCS 470 Li 60 Serie Manual De Instrucciones

3.1.2

Improper use

Any other usage not in keeping with the afore-
mentioned ones may be hazardous and
harm persons and/or damage things.
Examples of improper use may
include, but are not limited to:
– Allowing children, animals or other
passengers to ride on the machine as
they could fall off and injure themselves or
compromise safe driving by the operator.
– Letting oneself be transported by the machine.
– Using the machine to tow or push loads.
– Using the cutting means on surfaces other than grass.
– Using of the machine for leaf or debris collection.
– Using the machine to trim hedges, or for
cutting vegetation other than grass.
– Use of the machine by more than one person.
IMPORTANT Improper use of the machine will
invalidate the warranty, relieve the Manufacturer from
all liabilities, and the user will consequently be liable
for all and any damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by consumers,
i.e. non-professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must
be used by one operator.
3.2

SAFETY SIGNS

The machine has various symbols on it (Fig.2). They are
used to remind the operator of the behaviour to follow
to use it with the necessary attention and caution.
Meaning of symbols:
Warning. Read the instructions
before operating the machine.
Danger! Risk of thrown objects.
Keep all persons away from the
work area whilst working.
Only for lawnmowers with
combustion motors.
Danger! Danger of cutting yourself.
Cutting means in motion. Do not
put hands or feet near or under the
opening of the cutting means.
Be careful when using the sharp
cutting means. Do not put hands
or feet near or under the opening
of the cutting means. The cutting
means continues to turn even after
the motor has been switched off.
Remove the safety key (deactivation
device) before doing maintenance.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.
3.3

IDENTIFICATION LABEL

The identification label holds the following data (Fig.1.0).
1. Sound power level.
2. CE conformity marking.
3. Year of manufacture.
4. Type of machine.
5. Serial number.
6. Name and address of Manufacturer.
7. Article code.
8. Max. motor operation speed.
9. Weight in kg.
10. Power voltage and frequency.
11. Electrical protection rating.
12. Nominal power.
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorised service workshop.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4

MAIN COMPONENTS

The machine is composed of a series of main
components that have the following functions (Fig.1):
A. Chassis: this is the casing that houses
the rotating cutting means.
B. Motor: the driving force for the cutting
means and wheel drive (if provided).
C. Cutting means: the element
designed to cut the grass.
D. Handle: this is the operator's work station.
It is long enough to ensure the operator
remains at a safe distance from the
rotary cutting means whilst working.
E. Battery : provides the energy for starting the
motor. Its specifications and regulations for
use are described in a specific manual.
F. Control lever: starts/stops the
motor and simultaneously engages/
disengages the cutting means.
G. Drive lever (if provided): the lever
that engages the wheel drive and allows
the machine to move forward.
H. Hatch for accessing the battery compartment
I. Safety key (Deactivation device): The key
enables / disables the machine electric circuit.
J. Battery charger : device used
to recharge the battery.
EN - 4