Disassembly; Warranty; Disposal - Glatz PIAZZINO Instrucciones De Montaje Y Uso

Handling and maintenance
• Allow the sunshade to dry when open to prevent the formation of mould and
discolouration.
• A protective sleeve protects the sunshade and will extend its service life.
• Only pull the protective sleeve over the dry sunshade when it is dry.
• Do not clean the protective sleeve in the washing machine. Do not use
chemicals.
• Clean the sunshade cover when needed with lukewarm water, fine deter-
gents and a sponge.
• Do not use any bleach or sharp objects, to avoid damage to the cover.
• Check the tightness of all screws from time to time and tighten them if
necessary.
• If the sunshade is located in a highly exposed position, increased wear and
tear must be expected. In such cases we recommend more intensive care
and maintenance.
• In most cases, defective sunshades can be repaired by your GLATZ partner.
Only use original replacement parts FROM GLATZ.

Disassembly

Dismantle the sunshade if it is not going to be used for a long time.
DANGER! DANGER OF TIPPING DANGER OF INJURY IF THE SUNSHADE
TOPPLES OVER
1. Close and tie the sunshade properly.
2. Dismantle the sunshade in reverse mounting direction.
3. Store the sunshade in lying position together with all accessories in a dry
place.
24 25

Warranty

Please contact your GLATZ partner before returning the product. The
warranty on the sunshade lasts for 24 months from the date of purchase.
The warranty expires in the following cases:
• External application of excessive force
• Inappropriate operation or maintenance of the sunshade
• Damage arising from force majeure
The wind guarantee for an open sunshade is limited. The maximum
permissible wind speeds always require a fixed anchorage in the ground.
If there are several sunshades, a minimum distance of 20 cm must be
maintained between any two of them. Likewise, a minimum distance of 20
cm must be maintained between the sunshade and walls.

Disposal

This symbol on the product, accessories or packaging indicates that the
product must not be treated as unsorted domestic waste but must be
disposed of separately. Dispose of the product at a designated recycling
collection point. The packaging is made of environmentally friendly mate-
rials that can be disposed of at your local recycling facilities. By disposing
of the product correctly, you will help to avoid possible environmental and
health hazards. The product is made of metal and synthetic parts. End-of-
life disposal must be carried out in accordance with regional environmen-
tal and waste regulations.