Disassembly; Warranty; Disposal - Glatz FORTANO Instrucciones De Montaje Y Uso

Handling and maintenance
• Allow the parasol to dry when open to prevent the formation of mould and
discolouration.
• A protective sleeve protects the parasol and will extend its service life.
• Only pull the protective sleeve over the dry parasol when it is dry.
• Do not clean the protective sleeve in the washing machine. Do not use
chemicals.
• Clean the parasol cover when needed with lukewarm water, fine detergents
and a sponge.
• Do not use any bleach or sharp objects, to avoid damage to the cover.
• Check the tightness of all screws from time to time and tighten them if
necessary.
• If the parasol is located in a highly exposed position, increased wear and tear
must be expected. In such cases we recommend more intensive care and
maintenance.
• In most cases, defective parasols can be repaired by your GLATZ partner.
Only use original replacement parts FROM GLATZ.

Disassembly

Dismantle the parasol if it is not going to be used for a long time.
DANGER! DANGER OF TIPPING DANGER OF INJURY IF THE PARASOL
TOPPLES OVER
1. Close and tie the parasol properly.
2. Dismantle the parasol in reverse mounting direction.
3. Store the parasol in lying position together with all accessories in a dry
place.
30 31

Warranty

Please contact your GLATZ partner before returning the product. The
warranty on the parasol lasts for 24 months from the date of purchase.
The warranty expires in the following cases:
• External application of excessive force
• Inappropriate operation or maintenance of the parasol
• Damage arising from force majeure
The wind guarantee for an open parasol is limited. The maximum permis-
sible wind speeds always require a fixed anchorage in the ground. If there
are several parasols, a minimum distance of 20 cm must be maintained
between any two of them. Likewise, a minimum distance of 20 cm must
be maintained between the parasol and walls.

Disposal

This symbol on the product, accessories or packaging indicates that the
product must not be treated as unsorted domestic waste but must be
disposed of separately. Dispose of the product at a designated recycling
collection point.
The packaging is made of environmentally friendly materials that can be
disposed of at your local recycling facilities. By disposing of the product
correctly, you will help to avoid possible environmental and health
hazards. The product is made of metal and synthetic parts. End-of-life
disposal must be carried out in accordance with regional environmental
and waste regulations.