Uline H-8726 Manual Del Usuario página 2

WARNING! Do not pull trigger or depress
contact arm while connected to the air supply
as the tool may cycle, possibly causing injury.
WARNING! Always disconnect air supply:
• Before making adjustments.
• When servicing the tool.
• When clearing a jam.
• When tool is not in use.
• When moving to a different work area, as
accidental actuation may occur, possibly
causing injury.
WARNING! When loading tool:
• Never place a hand or any part of body in
fastener discharge area of tool.
• Never point tool at anyone.
• Do not pull the trigger or depress the trip as
accidental actuation may occur, possibly
causing injury.
WARNING! Always handle the tool with care:
• Never engage in horseplay.
• Never pull the trigger unless nose is directed
toward the work.
• Keep others a safe distance from the tool
while tool is in operation as accidental
actuation may occur, possibly causing injury.
WARNING! The operator must not hold the
trigger pulled on contact arm tools except
during fastening operation as serious injury could
result if the trip accidentally contacted someone
or something, causing the tool to cycle.
WARNING! Keep hands and body away from
the discharge area of the tool. A contact arm
tool may bounce from the recoil of driving a
fastener and an unwanted second fastener
may be driven, possibly causing injury.
WARNING! Check operation of the contact arm
mechanism frequently. Do not use the tool if
the arm is not working correctly as accidental
driving of a fastener may result. Do not interfere
with the proper operation of the contact arm
mechanism.
PAGE 2 OF 27
SAFETY CONTINUED
WARNING! Do not drive fasteners on top of
other fasteners or with the tool at an overly
steep angle as this may cause deflection of
fasteners which could cause injury.
WARNING! Do not drive fasteners close to the
edge of the work piece as the wood may split,
allowing the fastener to be deflected, possibly
causing injury.
WARNING! This nailer produces sparks
during operation. Never use the nailer near
flammable substances, gases or vapors
including lacquer, paint, benzene, thinner,
gasoline, adhesives, mastics, glues or any
other material that is – or the vapors, fumes
or by products of which are – flammable,
combustible or explosive. Using the nailer
in any such environment could cause an
explosion resulting in personal injury or death
to user and bystanders.
WARNING! Never use rafter hook to hang tool
from body, clothing or belt.
WARNING! When working on air tools note the
warnings in these instructions and use extra
care when evaluating problem tools.
WARNING! Do not use oxygen, combustible
gases or bottled gases as a power source for this
tool, as tool may explode, possibly causing injury.
WARNING! When working on air tools note the
warnings in these instructions and use extra
care when evaluating problem tools.
0421 IH-8726