Instruction Manual - GRAPHITE 58G011 Manual Del Usuario

TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
CORDLESS BLADE SAWING
MACHINE (JIGSAW)
58G011
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SPECIFIC REGULATIONS REGARDING SAFE USE OF THE
JIGSAW
• When carrying out tasks when work tool can hit hidden
electric wires, hold the tool by insulated areas of the handle.
Contact with power supply line may transfer its voltage to metal
parts of the power tool and cause electric shock.
• Keep hands at safe distance from the cutting area. Do not put
them under processed piece. Contact with blade may cause
injury.
• Switch off the jigsaw after work. Remove blade from
processed piece only when it is at standstill. This way you can
avoid kick back and it is possible to safely put away the power tool.
• Use only undamaged blades in good technical condition. Bent,
blunt blades may break, additionally may affect cutting line and
contribute to or cause kick back.
• Dust of certain wood and metal types may be dangerous to
health and cause allergic reactions, respiratory tract illness or
be carcinogenic.
- Use dust masks when cutting to protect your respiratory system
against produced dust.
- Use dust extraction system when cutting wood.
- Always provide good ventilation of your workplace.
• Do not cut water system pipes with the jigsaw. Cutting a pipe
may cause material damages or electric shock.
• Carefully check the processed material before cutting to eliminate
possibility of cutting nails, bolts, or other hard objects.
• Do not cut objects thicker than allowed in technical specification
for a given material.
• Hold the jigsaw in a closed hand.
• Ensure the jigsaw does not have contact with the material before
pressing the switch.
• Do not touch moving parts with your hand.
• Do not put away the jigsaw until it stops moving. Do not switch
the jigsaw on when not holding it.
• Do not touch the blade or processed material immediately
after the work has been finished. Those elements may be hot
and may cause burns.
• When you see unusual behaviour of the tool or hear strange
noises, immediately switch off the tool and remove the plug from
mains socket.
• To ensure proper cooling keep ventilation holes in the jigsaw
body uncovered.
CORRECT OPERATION AND USE OF BATTERIES
• Battery charging process should be supervised by the user.
• Avoid charging the battery in temperature lower than 0°C.
• Use only the charger recommended by the manufacturer.
Using charger designed for other type of battery brings the risk of fire.
• When the battery is not in use, store it away from metal
objects such as paper clips, coins, keys, nails, screws or any
other small metal objects that can short-circuit the battery
connectors. Short-circuit of battery connectors may cause burns
or fire.
• In case of battery damage and/or improper use it may
produce gas. Ventilate room and seek medical attention in
case of medical symptoms. Gas can damage respiratory tract.
• In extreme conditions liquid may leak out of the battery.
The liquid coming out of the battery may cause irritations or
burns. When a leak is found, follow the below procedure:
- Carefully wipe the liquid with a cloth. Avoid contact of the liquid
with skin and eyes.
- In case the liquid gets onto skin, immediately wash the spot
abundantly with clean water, you can also neutralize the liquid
with a mild acid, e.g. lemon juice or vinegar.
- When the liquid gets into eyes, wash it immediately with a lot of
clean water for at least 10 minutes. Seek medical advice.
• Do not use damaged or modified battery. Damaged or modified
batteries may behave unpredictably, causing fire, explosion or risk of
injuries.
• Do not expose the battery to humidity or water.
• Always keep the battery away from sources of heat. Do not leave
the battery for a long time in high temperature (in direct sunlight,
in proximity of heaters and wherever the temperature exceeds
50°C).
• Do not expose the battery to fire or excessive temperature.
Exposure to fire or temperature above 130°C may cause explosion.
CAUTION! Temperature of 130°C can be also defined as 265°F.
• Observe all charging instructions. Do not charge the battery
in temperature outside of range defined in the rating data
table from the instruction manual. Incorrect charging or
charging in temperature outside of defined range may damage the
battery and increase the risk of fire.
BATTERY REPAIRS
• Do not repair damaged batteries. Battery can be repaired only by
the manufacturer or in an authorised workshop.
• When disposing of the worn out battery, take it to a service
point where you can utilize such dangerous wastes.
SAFETY REGULATIONS FOR THE CHARGER
• Do not expose the charger to humidity or water. Ingress of
water into the charger increases risk of electric shock. Use the charger
only in dry rooms.
• Disconnect the charger from power supply before starting any
maintenance or cleaning.
• Do not use the charger when placed on flammable surface
(e.g. paper, textiles) or in proximity of flammable substance.
Greater charger temperature when charging increases risk of fire.
• Check condition of the charger, cable and plug before each
use. Do not use the charger if any damage is found. Do not
try to disassemble the charger. All repairs should be made at an
authorized service workshop. Improper charger assembly may cause
electric shock or fire.
• Children or persons who are physically, emotionally or mentally
disabled and other persons, whose experience or knowledge
is insufficient to use the charger while following all safety rules
should not use the charger without supervision of person
responsible for their safety. Otherwise there is a risk of improper
use and injuries in consequence.
• When the charger is not in use, it should be disconnected from
the mains network.
• Observe all charging instructions. Do not charge the battery
in temperature outside of range defined in the rating data
table from the instruction manual. Incorrect charging or
charging in temperature outside of defined range may damage the
battery and increase the risk of fire.
12