Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
3. Press
or
4. Press [MENU] or
5. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
DRC (Dynamic range control)
Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds
easier to hear in a noisy environment.
1. Under DAB mode, press
displayed on the top right.
2. Press MENU to confirm the setting. The display will return to normal.
DRC OFF - DRC is switched off, Broadcast DRC will be ignored.
DRC LOW - DRC level is set to 1/2 that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Prune (To remove stations which are listed but unavailable)
Under DAB mode, press
access the Prune option.
System (DAB)
Under DAB mode, press
enter the system setting.
1. Language
Press [ENTER] to set the language. The source language is English and the selected language
will have "*" displayed on the top right.
It's available in a choice of "Deutsch", "Italiano","Français".

2. Factory Reset

Press [ENTER] for factory reset. If you wish to perform the reset operation, push
until "YES" is highlighted on the display and press [ENTER]. A full reset of your radio will be
performed. All presets and station lists will be erased.
3. SW Version
Press [ENTER] to view the DAB software version. Press [Menu] or
to normal.
*If no buttons are pressed after 30 seconds, the display will return to normal.
to go to the desired channel. The graph will indicate the signal strength.
to exit scan.
or
to select "DRC". Press the [ENTER] key and "*" will be
or
to show the submenu" Prune". Press the [ENTER] button to
or
show the "SYSTEM" submenu. Press the ENTER button to
- EN 8 -
or
. The display will return

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mic122dabbtMic125dabbt

Tabla de contenido