Publicidad
Step 11
Fasten eight METAL BRACKETS (4G) to the ENDS (A
å
and B) and BOTTOM (E). Use eight BLACK 9/16" LARGE
HEAD SCREWS (1S).
NOTE: Be sure the edges of the METAL BRACKETS are even
å
with the edges of the ENDS and BOTTOM.
Fasten the BASE (H) to the ENDS (A and B) and BOTTOM (E).
å
Use eight BLACK 9/16" LARGE HEAD SCREWS (1S) through
the METAL BRACKETS and into the BASE.
B
4G
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
H
E
4G
1S
Flat edge
A
4G
Page 15
Publicidad
