Publicidad
Step 14
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D22 and D23).
å
Fasten a DRAWER RIGHT (35AC) to the DRAWER RIGHT SIDE (D22)
å
and a DRAWER LEFT (35AD) to the DRAWER LEFT SIDE (D23). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT"
å
for easy identifi cation.
NOTE: The glides are not intended to rotate.
å
Repeat this step for the other drawers.
å
Glide end
1
2
Page 18
10A
D23
(4 screws per drawer)
GOLD 5/16" FLAT HEAD SCREW
(24 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D22
2
3S
Glide end
1
Publicidad
