Hardware Overview; Connections - Kicker NISSAN Manual Del Propietário

Connections

The Nissan Tailgate Audio by KICKER has multiple hardware connections to
accommodate any audio application, indoors and outdoors.
Peel back the protective covering located on the side of the Nissan Tailgate
Audio by KICKER to access the hardware panel. Fully charge the Nissan
Tailgate Audio by KICKER for 6 hours before first use. Remember to replace
the protective covering when finished. When operating near water or other
risky areas, you are solely responsible for maintaining the water-resistant
integrity of the Nissan Tailgate Audio by KICKER. All connections should be
removed and the cap should be tightly secured.
DC Power - Power input. Use only a
KICKER-approved power supply.
15V, 2.66A
4
Hardware reset
External Antenna - Attach the included FM
radio antenna to increase the radio range. For
best results, hang the antenna wire as high
as possible.
AUX In - Provides audio line input via 3.5mm
connection with AUX input mode.
USB Charge Out - The USB Type A
connection on the Nissan Tailgate Audio by
KICKER acts as a power bank to charge your
external devices when the speaker is on, or
DC power is connected. It is also used to
update the firmware. Charging current up to
2.1A.