aquatermic XK49 Manual Del Usuario página 19

Wired Controller XK49
(5) Inserting or removing the gate control card is like connecting or
disconnecting power of the gate control device. When the card is inserted,
the device supplies power AC100-240V/DC5-24V to wired controller which
identifies card insertion. When the card is removed, the device stops
supplying power AC100-240V/DC5-24V to wired controller which identifies
card removal. Figure 3.12 and figure 3.13 demonstrate wired controller
connecting gate control power of AC100-240V or DC5-24V:
Figure 3.12 Wired Controller Connecting to Gate Control AC100-240V
Figure 3.13 Wired Controller Connecting to Gate Control DC5-24V
Note: Users shall prepare the gate-control device by themselves.
16