aquatermic XK49 Manual Del Usuario página 29

Wired Controller XK49
Set static
P30 pressure of
indoor fan motor
High ceiling
P31
installation*
P33 Set Timer
Clock Timer
P34 repetition is
valid
Cooling setting
temperature
P37
under auto
mode
01-09: static
pressure level
of indoor fan
motor
00: installation
height of
standard ceiling
01: installation
height of high
ceiling
00: general
timer
01: clock timer
00: once
01: repeat
everyday
17° C~30° C(63° 25° C
F~86° F) (77° F)
26
There are two kinds of static pressure
level:
5 levels: 03, 04, 05, 06, 07
9 levels: 01, 02, 03, 04, 05, 06, 07, 08,
09
05 Static pressure level range is different
for different models; the wired controll-
er will automatically select static
pressure level range of indoor fan
motor accor-
ding to the model of indoor unit.
Only applicable to casset-
00
te units
This setting is valid when it is used to
control one (multiple) indoor unit (s)
00
with other wired controller (s) with
timer function.
This setting is valid when it is used to
control one (multiple) indoor unit (s)
00 with other wired controller (s) with
timer function, and when the unit timer
function is set "Clock Timer".
When the temperature unit is° C,
cooling setting temperature minus
heating setting temperature≥1°C.
When the temperature unit is° F,
cooling setting temperature minus
heating setting temperature≥2°F.