Child Lock Function; Gate-Control Function - aquatermic XK49 Manual Del Usuario

Wired Controller XK49
function is on, all controls of the wired controller are disabled. When Partial Shield
function is on, those controls that are shielded will be disabled.
When the remote monitor or central controller activates Remote Shield on the
wired controller, "
controller, "

4.7 Child Lock Function

When unit is turned on normally or turned off, pressing "
together for 5 seconds will turn on Child Lock function. "
Pressing " " and "
All the other buttons will be disabled when Child Lock function is on.

4.8 Gate-control Function

When there is Gate-control System, user can insert a card to turn on the unit or
pull off a card to turn off the unit. When the card is re-inserted, the unit will recover the
operation as state in memory. When the card is pulled off (or improperly inserted),
" " icon will show. neither remote control nor operation of wired controller will be
effective and icon "
" icon will show. If user wants to control through the wired
" icon will blink to remind that these controls are disabled.
" together again for 5 seconds to turn off this function.
" will be flickering.
" will show on the display.
32
" and " " button