aquatermic XK49 Manual Del Usuario página 26

View indoor
C17 relative
humidity
One-button
viewing of
C18
indoor unit
project number
Operation method:
Enter into review process and press "MODE" button to
enter into the review interface of indoor relative
20～90
humidity under C17 status. Press "
relative
button to switch the number of indoor unit.
humidity20%
Display method:
～90%
Temp area: display current indoor unit's project
number
Timer zone: display indoor relative humidity
Operation method:
Enter viewing, short-press "MODE" button in "C18"
status to turn on the function of one-button viewing
indoor unit project code, and the wired controller will
enter the interface of viewing indoor unit project code.
Press "
Display method:
Temperature zone: displays number of the current
indoor unit
Timer zone: displays project number of indoor unit
Note:
1) After turning on the one-button viewing function,
each wired controller of the entire system will display
1-255:
the project number of its controlling indoor unit on its
Project
timer zone. (The timer zone will display different
number of
project numbers in turn with an interval of 3 seconds if
online indoor
one wired controller is controlling multiple indoor
unit
units.)
2) Slave wired controller cannot view "C18".
Cancel method:
1) If user exits the "C18" interface manually, the
one-button viewing function will be immediately turned
off.
2) If system exits the "C18" interface due to no action
in 20 seconds, user has to press the "ON/OFF" button
under on/off status to cancel this function.
3) After the one-button viewing function is turned on,
pressing the "ON/OFF" button of any wired controller
of the same system network under on/off status will
cancel this function.
23
Wired Controller XK49
" or " " button to select the indoor unit.
" or " "