Technical Data - Leister LE 5000 HT-U Instrucciones De Funcionamiento

Conformity
(Pursuant to EC Machinery Directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation:
Model:
- insofar as is possible with respect to the scope of delivery - is in compliance with applicable basic requirements of
the EC Machinery Directive (2006/42).
The incomplete machine is furthermore in compliance with the requirements of the following EC directive(s):
EC directive(s):
Harmonized standards:
Furthermore, we declare that the special technical documents according to Annex VII (Part B) were prepared for
these incomplete machines, and we agree to transmit them electronically to the market surveillance authorities
upon justified request.
Name of authorized representative for documentation: Thomas Schäfer, Manager Product Conformity
Commissioning of the incomplete machine is forbidden until it has been determined if need be that the machine
that was installed in the incomplete machine is in compliance with the stipulations of the EC Machinery Directive
(2006/42).
Kaegiswil, 03/11/2019
Disposal
Electrical equipment, accessories, and packaging should be recycled in an environmentally friendly
way. For EU countries only: Do not dispose of electrical equipment with household refuse.

Technical data

Model
Voltage
Frequency
Power
Max. air outlet temperature
Max. air inlet temperature
Min. air volume (20°C)
Max. static pressure
Weight
Installation dimensions (size)
Conformity marking
Protection class I
We reserve the right to make technical changes.
Sealing unit
LE 5000 HT-U, LE 5000 HT-S
Low Voltage Directive
2014/35
RoHS Directive 2011/65
EN ISO 12100, EN 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~
Hz
kW
°C
°C
l/min
Pa
kg
mm
Christoph Baumgartner, GM
LE 5000 HT-U
3 x 200 3 x 400
50/60 50/60
7 7.5
900 900
80 80
400 400
1 x 10
5
9
Page 3
LE 5000 HT-S
3 x 200 3 x 400
50/60 50/60
7 7.5
900 900
80 80
400 400
1 x 10
5
9
Page 4
11