Installing Windows - ASROCK Fatal1ty Z77 Professional M Serie Manual Del Usuario

2.15 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.16 Installing Windows

RAID Functions
If you want to install Windows
/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.17 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.17.1 Installing Windows
If you want to install Windows
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE] for SATA2_2 to SATA2_5 and
SATA3_0 and SATA3_1 ports.
Set the option "ASMedia SATA3 Mode" to [IDE] for SATA3_A1 and SATA2_A2
ports.
®
STEP 2: Install Windows
Fatal1ty Z77 Professional-M Series Motherboard
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
Advanced screen
XP / XP 64-bit OS on your system.
TM TM
/ Vista 64-bit With
TM
64-bit on your SATA
TM TM
/ Vista 64-bit / XP /
TM
64-bit / XP / XP 64-
®
XP / XP 64-bit.
Storage Confi guration.
47