Cleaning The Pre-Filter; About The Pre-Filter - Boneco W400 Manual De Instrucciones

CLEANING THE PRE-FILTER

ABOUT THE PRE-FILTER

The pre-filter cleans the air from coarse contaminants.
Clean the pre-filter if it is dusty or dirty.
CLEANING THE PRE-FILTER
1. Press down each of the four corners in sequence to
unlock them.
2. Remove the pre-filter by pulling it upwards by the tab
in its center.
3. Gently wash the pre-filter under running water using
a cleaning brush.
4. Dry the pre-filter with a cloth.
5. Insert the pre-filter into the appliance.
6. Reattach the cover.
39
en