Philips OneBlade QP2520/65 Manual De Instrucciones página 10

10
English
General
Charging
Battery status indicator QP2531, QP2530:
- This appliance is waterproof. It is suitable for
use in the bath or shower and for cleaning
under the tap. For safety reasons, the appliance
can therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Note: This appliance can only be used without
cord.
QP2531, QP2530: Charging normally takes approx.
4 hours.
QP2526, QP2525, QP2522, QP2521, QP2520:
Charging normally takes approx. 8 hours.
A fully charged appliance has an operating time of
up to 60 minutes (QP2531, QP2530) or 45 minutes
(QP2526, QP2525, QP2522, QP2521, QP2520).
Charge the appliance before you use it for the first
time and when the battery charge indicator
indicates that the battery is almost empty.
When the battery status indicator flashes orange,
the battery is almost empty.